Experiment with different temperature and airflow settings to fully manipulate vapor production. Low/medium settings with slow consistent pulls generate large, smooth vapor production with the best flavor. We recommend opening the airflow vent halfway, starting with a low temperature and gradually increasing. Once you find your preferred temperature, adjust airflow vent to find the proverbial sweet spot. We have found that different occasions call for different settings.
No. CO2 is an inert gas that can have properties of a weak solvent (like water) when pressurized and heated past its critical point.
If you have an adjustable voltage battery/mod, we recommend 3.2v for the best flavor. To avoid burning the oil, be sure your Capsl is primed using the preheat feature, and keep voltage below 3.7V. Don't hold down the button for more than 3-4 seconds without releasing the button for 1-2 seconds between each pressing. For more info on this visit our proper use guide.
Return to the dispensary where you purchased it from within the term of their return policy for a replacement or refund. We recommendwithin 60 days of purchase, but each dispensary may have a different return policy. Be prepared to demonstrate the defect of the cartridge.
Typically, this has to do with the coil having an air bubble on top of it rather than being completely saturated by the oil. To mitigate this, use the preheat feature by double tapping the button on your Evolvd battery.
To turn on/off an EVOLVD battery (and most others), press the button 5 times rapidly.
If the LED light blinks rapidly when you push the power button without providing a hit or if the battery does nothing at all when pressing the power button, your battery is most likely dead and will need to be recharged. The LED will flash red when the battery is at 5%, at which point we recommend charging immediately.
Your Evolvd battery is universally chargeable via micro USB. Insert micro USB cable into the charging port on the side of the battery, insert the other end to a power supply or any compatible USB port. The LED light indicates power level during charge: green = fully charged / blue = half charged / red = low power.
Not Necessarily. We have found that some non-Evolvd batteries with buttons will send a charge to Capsl, but we do not recommend or guarantee any level of functionality. To avoid damage to your Capsl and to ensure optimal vaping of our oil, pair Capsl with Evolvd battery.